DIFFUSION D'EQUIEPEMENTS DE PROTECTION INDIVIDUELLE / CONFECTION D'HABITS PROFESSIONNELS
Menu

Catalogue

Short 8BOSG
BOUND GREEN >>> shorts Matière >> 60 % coton 40% polyester 300 g/m² Genoux >> 100% CORDURA 500D noir • Possibilité d’adapter une paire de genouillères 8KNEE Coutures >> apparentes de couleurs différentes, triple...
Pantalon 8BOPG
BOUND GREEN >>> pantalon Matière >> 60 % coton 40% polyester 300 g/m² Genoux et chevilles >> 100% CORDURA 500D noir • Possibilité d’adapter une paire de genouillères 8KNEE Coutures >> apparentes de couleurs...
Veste 8BOVG
BOUND GREEN >>> veste Matière >> 60 % coton, 40 % polyester, 300g/m² Liserés >> Rétro-réfléchissants Fermeture >> à glissière avec rabat à pression Manches >> amovibles Col >>...
Helmets CADÍ
Safety helmet for works at height. Made of ABS with high-quality ultraviolet stabilization. The head harness consists of an inner piece of PPE, with great consistency and good insulation capacity and an adjustable headband with a toothed wheel. The inner piece in contact with the...
Gilet 8BOGB
BOUND BLACK >>> gilet Matière >> 60 % coton, 40 % polyester, 300g/m² Liserés >> Rétro-réfléchissants Doublure >> Matelassée Fermeture >> à glissière en plastique avec curseur en...
Pantalon 8BOPB
BOUND BLACK >>> pantalon Matière >> 60 % coton 40% polyester 300 g/m² Genoux et chevilles >> 100% CORDURA 500D noir • Possibilité d’adapter une paire de genouillères 8KNEE Coutures >> apparentes de couleurs...
Veste 8BOVB
BOUND BLACK >>> veste Matière >> 60 % coton, 40 % polyester, 300g/m² Liserés >> Rétro-réfléchissants Fermeture >> à glissière avec rabat à pression Manches >> amovibles Col >>...
Pantalon 8BOPN
BOUND NAVY >>> pantalon Matière >> 60 % coton 40% polyester 300 g/m² Genoux et chevilles >> 100% CORDURA 500D noir • Possibilité d’adapter une paire de genouillères 8KNEE Coutures >> apparentes de couleurs...
Helmets MOD. TIRRENO TXR
Made of ABS with high-quality ultraviolet stabilization. Designed and prepared to fit the complete range of CLIMAX accesories. Only weights 318 g, with a textile harness with 4 or 6 anchoring points adjustable in height.  Incorporates a replaceable sweatband to easily absorb...
Helmets MOD. TIRRENO TX
Made of ABS with high-quality ultraviolet stabilization. Designed and prepared to fit the complete range of CLIMAX accesories. Only weights 318 g, with a textile harness with 4 or 6 anchoring points adjustable in height. Incorporates a replaceable sweatband to easily absorb sweat and securing...
Helmets MOD. 5-RS MINERO
Material: polyetilene Working temperature :–10ºC/+50ºC Electrical insulation up to 440 Vac Provided with stnadard lapmholder and clip for the power wire Colours: white, yellow, blue, red and green
Helmets MOD. 5-R MINERO
Material: polyetilene Working temperature :–10ºC/+50ºC Electrical insulation up to 440 Vac Provided with stnadard lapmholder and clip for the power wire Colours: white, yellow, blue, red and green
Veste 8BOVN
BOUND NAVY >>> veste Matière >> 60 % coton, 40 % polyester, 300g/m² Liserés >> rétro-réfléchissants Fermeture >> à glissière avec rabat à pression Manches >> amovibles Col >>...
Helmets MOD. 5 RG
Material: PEDH Plastic 6 point harness and harnes adjustable with a toothed wheel Working temperature: -10ºC / + 50ºC Electric insulation up to 440 Vac
Helmets MOD. 5-RS
Material: PEDH Plastic 6 point harness and manual adjustment Working temperature: -10ºC / + 50ºC Electric insulation up to 1000 Vac / 1500Vcc
Energy Absorbers MOD. 51
In the event of a fall, this part progressively absorbs its kinetic energy, preventing the impact of the fall from ever exceeding 6kN. The energy absorber has been designed to be linked to a fall-protection harness with a suitable connector without the need to use fastening parts as the absorber...
Energy Absorbers MOD.50
In the event of a fall, this part progressively absorbs its kinetic energy, preventing the impact of the fall from ever exceeding 6kN. The energy absorber has been designed to be linked to a fall-protection harness with a suitable connector without the need to use fastening parts as the absorber...
Energy Absorbers MOD. 47 DOUBLE
Kinetic energy arbsorber in polyamide 50 mm. Its elasticity reduces the force of impact upon the user to raise the comfort and security. Length: 1,20 m. Climax 30 Karabiner.
Energy Absorbers MOD. 47
Kinetic energy absorber in polyamide 50mm. Its elasticity reduces the force of impact upon the user to raise the comfort and security Length=1,20m Climax 30 Karabiner
Energy Absorbers MOD. 53 BUCLES
Loop twin-tailed energy absorbing made of 19 mm wide polyamide webbing. Includes 54 mm opening scaffold hook. Designed to be used in belay techniques at structure. Its design enables you to embrace the structure without having to strangle the tape. It offers great versatility, as the length of...
Energy Absorbers MOD.43
Energy absorber with an adjustable lanyard in polyamide, 14 mm diameter. Light alloy adjuster. Minimum length: 1,2m Total length: 1,70m
Energy Absorbers MOD. 38
Set composed of: - Polyamide rope lanyard, diameter: 14 mm - Energy absorbers - Connector mod. 31 - Connector mod. 32
Energy Absorbers MOD. 37/30
Set composed of: - Polyamide rope lanyard, diameter: 14 mm - Energy absorbers - Connectors mod. 30
Energy Absorbers MOD. 37
Set composed of: - Polyamide rope lanyard, diameter: 14 mm - Energy absorbers - Connector mod. 30 - Connector mod. 31
Energy Absorbers MOD. 36
Version of model 35-A with climax 30 karabiners. Total length: 1,75 m
Energy Absorbers MOD. 35
Composed of: -Energy absorber mod.32-A -Non adjustable lanyard Cu.29/1 -2 connectors mod. 31 -Connector mod 30 Packaging: box containing 30 units, individually shrink-wrapped
Energy Absorbers MOD. 34
Composed of: -Energy absorber mod. 32-A -Y-shapped webbing lanyard -2 connectors mod. 31 -Connector mod. 32 Packaging: box containing 30 units, individually shrink-wrapped
Energy Absorbers MOD. 33
Composed of: -Energy absorber mod.32-A -Non adjustable lanyard Cu. 29/1 -Connector mod. Pipeform -Connector mod. 30
Energy Absorbers MOD 32-A
Use preferably with a rope lanyard. The maximum admissible length of the energy absorber including the rope lanyard and connectors must not exceed two metres. Length : 35 cm
Energy Absorbers MOD. 31-A
Energy absorber lanyard Total length : 1,5m
Full body harnesses MOD. 60
Harness specially designed for electricity grid work. It made of non conductive 45 mm polyester webbing, with two anti fall anchoring points, dorsal and chest. Buckles are covered with dielectric material.
Full body harnesses MOD. 25-C/2 – 28-C
Integral fall-protection system. Made up of: - Work positioning belt.  - Full body harnesses mod 28-C. Can be used together or separately.  Available with work positioning belt 24-C
Full body harnesses MOD. 25-C/2 – 26-C
Integral fall-protection system. Made up of: - Work positioning belt 25-C/2. - Full body harnesses mod 26-C. Can be used together or separately.
Full body harnesses MOD. 25-C/2
High tenacity polyamide adjustable rope lanyard, 12 mm diameter.
Full body harnesses MOD. 24-C
Breathable padded belt providing maximum comfort in suspension. Two lateral atachment point. High tenacity polyamide adjustable rope lanyard, 12mm diameter.
Full body harnesses MOD. ATLAS BASIC
Waist harness and work positioning belt. Lateral work positioning attachment, ventral fall arrest attachment point and black retention attachment. Available three tool holder.
Full body harnesses MOD. ATLAS
With 4 anchoring points: two anti-fall arrest points (dorsal and chest), one work positioning anchoring point made-up 2 fordable side ring and one ventral attachment point. Quick/fi tting buckles on leg supports and 4 rings to hold materials.
Full body harnesses MOD. ROTA BASIC
With 3 anchoring points: two anti fall anchoring points (dorsal and chest) and one work positioning anchoring point made-up 2 fordable side ring. The chest anchoring point is manufactured in a polyester webbing for greater comfort.  Padded leg supports, wide waistband for more...
Full body harnesses MOD. 48-C
Equipped:  -47 mm Polyester straps  -Length adjusters for chest and legs.  -Back attachment point -Automatic buckles  -Buckle for attaching the positioning belt.
Full body harnesses MOD. 29-C
Equipped: - 45 mm wide polyester straps.  - Length adjusters for chest and legs.  -Hook-up points: one dorsal fall -protection and another frontal.
Full body harnesses MOD. 27-C
Equipped: - 47 mm wide polyester straps  - Length adjusters for chest and legs.  - Hook-up points: one dorsal fall - protection and another frontal.
Full body harnesses MOD. 26-C
Equipped:  -47 mm Polyester straps  -Length adjusters for chest and legs.  -Dorsal protection fall - hook-up.  -Buckle for attaching the positioning belt.
Full body harnesses MOD. 22-C
Equipped:  -47 mm Polyester straps  -Length adjusters for chest and legs.  -2 attachment points: back and breast  -Automatic buckles -Buckle for attaching the positioning belt.
Full body harnesses MOD. 21-C ATEX
This harness must be used in explosion risk environments. Equipped: -47 mm Polyester straps -Length adjusters for chest and legs. -2 attachment points: back and breast -Automatic buckles -Buckle for attaching the positioning belt.
Kit de signalisation HI-VIZ 7WARY
Hi-Viz >>> Kit de signalisation: Gilet + Triangle + Sacoche 1 GILET DOUBLE BANDE Matière >> maille polyester 120 g/m² fluorescente jaune. Bandes >> 2 bandes rétroréfléchissantes Classe 2. Fermeture >> par bande agrippante...
Full body harnesses MOD. 20-C
quipped: -47 mm Polyester straps -Length adjusters for chest and legs. -Back attachment point -Automatic buckles -Buckle for attaching the positioning belt.
CASQUE EARLINE 65125
Casque avec lunettes intégrées   > Coiffe en polyéthylène  > Réglable (de 2 en 2 mm) > Bande anti-transpiration 37cm > Poids : 400g
CASQUE EARLINE 65124
Casque avec lunettes intégrées   > Coiffe en polyéthylène  > Réglable (de 2 en 2 mm) > Bande anti-transpiration 37cm > Poids : 400g
CASQUE EARLINE 65122
Casque avec lunettes intégrées   > Coiffe en polyéthylène  > Réglable (de 2 en 2 mm) > Bande anti-transpiration 37cm > Poids : 400g
CASQUE EARLINE 65121
Casque avec lunettes intégrées > Coiffe en polyéthylène  > Réglable (de 2 en 2 mm) > Bande anti-transpiration 37cm > Poids : 400g
Brassard HI-VIZ ARMYARD 7ARMG
ARMYARD >>> brassard Hiviz Matière extérieure >> 300D polyester oxford / PU. Bandes >> 3M réfléchissantes. Taille réglable >> bande agrippante. Dimensions >> 45cm x 10cm.
Brassard HI-VIZ ARMYARD 7ARMO
ARMYARD >>> brassard Hiviz Matière extérieure >> 300D polyester oxford / PU. Bandes >> 3M réfléchissantes. Taille réglable >> bande agrippante. Dimensions >> 45cm x 10cm.